MESSAGE CODES
お知らせ番号
最終更新日:2026年11月15日
スマホに出るお知らせは「できなかったこと」+番号の形です。文言は同じでも、番号が違えば原因が違います。番号でこの表を引いてください。
例:明るさを変えられませんでした + A-7 → Linux で ddcutil が入っていない。
A 明るさを変えられませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| A-1 | Mac で明るさの変更に失敗しました | もう一度押してください。直らない場合はPC側アプリを再起動してください |
| A-2 | Windows で明るさの変更に失敗しました | 外付けモニターは明るさ変更に対応していないことがあります。ノートPCの内蔵画面でお試しください |
| A-3 | Linux で明るさを変えるソフトが入っていません | ターミナルで sudo apt install brightnessctl(または light)を実行してください |
| A-4 | Linux で明るさを変える権限がありません | sudo usermod -aG video $USER を実行し、ログインし直してください |
| A-5 | Intel の Mac に外付けモニターがつながっています | Intel Mac では外付けモニターの明るさを変えられません。内蔵画面のみ対応しています |
| A-6 | 外付けモニターが明るさの変更を受け付けませんでした | モニター側の設定で「DDC/CI」を有効にしてください。変換アダプタを使っている場合は外して直接つないでください |
| A-7 | Linux で外付けモニター用のソフトが入っていません | ターミナルで sudo apt install ddcutil を実行してください |
| A-8 | Mac で同梱のツールが見つかりません | PC側アプリを入れ直してください |
| A-9 | Linux で外付けモニターを操作する権限がありません | sudo usermod -aG i2c $USER を実行し、ログインし直してください |
B 動画を操作できませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| B-1 | 次の話の行き先が見つかりませんでした | 動画の再生ページを開き直してからお試しください |
| B-2 | 前の話の行き先が見つかりませんでした | 同上 |
| B-3 | 今見ている話数を読み取れませんでした | 作品の紹介ページではなく、再生中のページを開いてください |
| B-4 | 移動している間に、そのタブが別のページに変わりました | そのままもう一度押してください |
| B-5 | 第1話なので、前の話はありません | そのままお使いいただけます |
| B-6 | 最終話なので、次の話はありません | そのままお使いいただけます |
| B-7 | ページは移りましたが、自動で再生が始まりませんでした | PCの画面で再生ボタンを押すか、DeckMote の再生ボタンを押してください |
| B-8 | 同時視聴できる数の上限に達しました | ほかの端末で見ている動画を止めてください |
| B-9 | 同時視聴できる数の上限に達しました(早送り・巻き戻し時) | ほかの端末で見ている動画を止めてください |
| B-10 | 次の話へ移れませんでした | もう一度押してください。直らない場合は、動画の再生ページを開き直してください |
| B-11 | 前の話へ移れませんでした | 同上 |
C 音声の出力先を切り替えられませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| C-1 | 前の切り替えがまだ終わっていません | 数秒待ってからもう一度押してください |
| C-2 | 選んだ機器が切り替えに対応していません | 別の機器を選んでください |
| C-3 | 切り替えの実行に失敗しました | もう一度押してください。直らない場合はPCの音声設定から切り替えてください |
| C-4 | 一覧にあった機器が、押した時には無くなっていました | 一覧を開き直してください |
| C-5 | 切り替えられる機器が1つも見つかりません | PCにスピーカーやイヤホンがつながっているか確認してください |
| C-6 | Mac で出力先を切り替えるソフトが見つかりません | PC側アプリを入れ直してください |
| C-7 | Linux で出力先を切り替えるソフト(pactl)が入っていません | ターミナルで sudo apt install pulseaudio-utils を実行してください |
D 電源を操作できませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| D-1 | 2台目のスマホから電源を操作しようとしました | 電源の操作は、最初につないだスマホからのみ行えます |
| D-2 | スリープ・再起動・終了の実行に失敗しました | PCで直接操作してください |
E 文字を送れませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| E-1 | PCへ送る文字が溜まりすぎました | 少し待ってから、残りを入力し直してください |
| E-2 | クリップボードへ送る文字が上限(60万バイト)を超えました | 送る文字を減らしてください。超えた分は切られています |
F ブラウザを操作できませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| F-1 | Mac でブラウザを操作する許可がありません | システム設定 > プライバシーとセキュリティ > オートメーション で、DeckMote の Safari / Chrome をオンにしてください |
| F-2 | Safari の設定がオフです | Safari のメニュー「開発」>「デベロッパ設定…」で「Apple EventからのJavaScriptを許可」をオンにしてください |
| F-3 | ブラウザの操作が混み合っています | 少し待ってからもう一度押してください |
| F-4 | ブラウザの拡張機能が入っていません | PC側アプリのメニューから「ブラウザ拡張を入れる」を実行してください |
G 音量を変えられませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| G-1 | 音量の変更に失敗しました | もう一度押してください。直らない場合はPC側アプリを再起動してください |
H 操作できませんでした
| 番号 | 何が起きたか | どうすればいいか |
|---|---|---|
| H-1 | PCとスマホの時刻が1時間以上ずれています | どちらかの時刻を合わせてください(自動設定をおすすめします)。ずれている間は、なりすまし対策のため操作が届きません |
| H-2 | アプリ起動に登録した名前が空です | アプリ起動の設定で、起動するアプリを登録し直してください |
| H-3 | 対応していない形式のリンクです | 開けるのは http / https / mailto で始まるリンクのみです |
| H-4 | この操作に対応していません | スマホ側とPC側のアプリを、両方とも最新にしてください |
| H-5 | 操作が効きませんでした | もう一度押してください。直らない場合は、スマホとPCの両方のアプリを再起動してください |
| H-6 | PCが知らない命令が届きました(かっこ内が命令名) | PC側アプリを新しくしてください |
| H-8 | PC側で外部のプログラムを実行できませんでした(かっこ内が理由) | かっこ内の理由をご確認ください。分からない場合はお問い合わせください |
| H-9 | 設定をPCに保存できませんでした | PCの空き容量と、設定を書き込む場所の権限を確認してください。アプリを閉じるまでは設定が効きますが、次の起動で元に戻ります |
| H-10 | Mac でキー操作の許可がありません(デスクトップ表示) | システム設定 > プライバシーとセキュリティ > アクセシビリティ で、DeckMote をオンにしてください |
| H-11 | Linux の Wayland ではキー操作が届きません | XWayland を有効にして、ログインし直してください |
| H-12 | リンクを開けませんでした | リンクの住所が正しいか確かめてください。PCでブラウザが開けるかも確かめてください |
番号が付いていないお知らせ(「取り消しました」「次の話へ移動中…」など)は、失敗ではなく進行中・完了のお知らせです。
Each message on your phone is "what failed" plus a code. The same wording can have different causes — look up the code here.
Example: Could not change the brightness + A-7 → ddcutil is not installed on Linux.
A — Could not change the brightness
| Code | What happened | What to do |
|---|---|---|
| A-1 | Changing the brightness failed on Mac | Press again. If it keeps failing, restart the PC app |
| A-2 | Changing the brightness failed on Windows | External displays may not support brightness control. Try the built-in screen of a laptop |
| A-3 | The brightness tool is not installed on Linux | Run sudo apt install brightnessctl (or light) in a terminal |
| A-4 | No permission to change the brightness on Linux | Run sudo usermod -aG video $USER and log in again |
| A-5 | An external monitor is connected to an Intel Mac | Intel Macs cannot change external monitor brightness. Only the built-in display is supported |
| A-6 | The external monitor refused the change | Enable "DDC/CI" in the monitor's own settings. If you use an adapter, connect the monitor directly |
| A-7 | The external-monitor tool is not installed on Linux | Run sudo apt install ddcutil in a terminal |
| A-8 | A bundled tool is missing on Mac | Reinstall the PC app |
| A-9 | No permission to control external monitors on Linux | Run sudo usermod -aG i2c $USER and log in again |
B — Could not control the video
| Code | What happened | What to do |
|---|---|---|
| B-1 | The next episode could not be found | Reopen the playback page and try again |
| B-2 | The previous episode could not be found | Same as above |
| B-3 | The current episode number could not be read | Open the page that is playing, not the title's detail page |
| B-4 | The tab changed to a different page during the move | Just press again |
| B-5 | This is the first episode, so there is no previous one | Nothing to do |
| B-6 | This is the last episode, so there is no next one | Nothing to do |
| B-7 | The page moved, but playback did not start | Press play on the computer, or use DeckMote's play button |
| B-8 | The simultaneous streaming limit was reached | Stop playback on another device |
| B-9 | The simultaneous streaming limit was reached (while skipping) | Stop playback on another device |
| B-10 | Could not move to the next episode | Press again. If it keeps failing, reopen the playback page |
| B-11 | Could not move to the previous episode | Same as above |
C — Could not switch the audio output
| Code | What happened | What to do |
|---|---|---|
| C-1 | The previous switch has not finished | Wait a few seconds and press again |
| C-2 | The selected device cannot be switched to | Choose a different device |
| C-3 | Switching failed | Press again. If it keeps failing, switch from the computer's sound settings |
| C-4 | The device in the list was gone by the time you pressed | Reopen the list |
| C-5 | No device is available to switch to | Check that speakers or headphones are connected to the computer |
| C-6 | The output-switching tool is missing on Mac | Reinstall the PC app |
| C-7 | The output-switching tool (pactl) is not installed on Linux | Run sudo apt install pulseaudio-utils in a terminal |
D — Could not control the power
| Code | What happened | What to do |
|---|---|---|
| D-1 | A second phone tried to use the power controls | Power controls work only from the first phone that connected |
| D-2 | Sleep, restart or shut down failed | Do it on the computer directly |
E — Could not send the text
| Code | What happened | What to do |
|---|---|---|
| E-1 | Too much text was waiting to be sent | Wait a moment, then type the rest again |
| E-2 | The clipboard text exceeded the limit (600,000 bytes) | Send less text. The part that did not fit was cut |
F — Could not control the browser
| Code | What happened | What to do |
|---|---|---|
| F-1 | No permission to control the browser on Mac | In System Settings > Privacy & Security > Automation, turn on Safari / Chrome under DeckMote |
| F-2 | A Safari setting is off | In Safari, choose Develop > Developer Settings… and turn on "Allow JavaScript from Apple Events" |
| F-3 | Browser operations are busy | Wait a moment and press again |
| F-4 | The browser extension is not installed | Use "Install browser extension" from the PC app menu |
G — Could not change the volume
| Code | What happened | What to do |
|---|---|---|
| G-1 | Changing the volume failed | Press again. If it keeps failing, restart the PC app |
H — The action did not work
| Code | What happened | What to do |
|---|---|---|
| H-1 | The computer and phone clocks differ by over an hour | Correct one of them (automatic time is recommended). Until then, commands are rejected to prevent spoofing |
| H-2 | The registered app name is empty | Register the app again in the App Launcher settings |
| H-3 | Unsupported link format | Only links starting with http, https or mailto can be opened |
| H-4 | This action is not supported | Update both the phone app and the PC app |
| H-5 | The action had no effect | Press again. If it keeps failing, restart both apps |
| H-6 | The computer received an unknown command (shown in brackets) | Update the PC app |
| H-8 | An external program could not be run (reason in brackets) | Check the reason shown. Contact us if it is unclear |
| H-9 | The setting could not be saved on the computer | Check free space and write permission on the computer. The setting works until the app closes, then reverts |
| H-10 | No permission for key input on Mac (Show Desktop) | In System Settings > Privacy & Security > Accessibility, turn on DeckMote |
| H-11 | Key input does not reach a Wayland screen on Linux | Enable XWayland and log in again |
| H-12 | The link could not be opened | Check that the link address is correct, and that a browser can open on the computer |
Messages without a code ("Cancelled", "Moving to the next episode…") are progress or completion notices, not failures.
手机上的提示由“未能完成的事”加编号组成。即使文字相同,编号不同原因也不同。请按编号查阅下表。
例:无法调节亮度 + A-7 → Linux 上未安装 ddcutil。
A 无法调节亮度
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| A-1 | Mac 上调节亮度失败 | 请再按一次。若仍不行,请重启电脑端应用 |
| A-2 | Windows 上调节亮度失败 | 外接显示器可能不支持亮度调节。请在笔记本内置屏幕上尝试 |
| A-3 | Linux 上未安装调节亮度的软件 | 在终端执行 sudo apt install brightnessctl(或 light) |
| A-4 | Linux 上没有调节亮度的权限 | 执行 sudo usermod -aG video $USER 后重新登录 |
| A-5 | Intel 版 Mac 连接了外接显示器 | Intel 版 Mac 无法调节外接显示器亮度,仅支持内置屏幕 |
| A-6 | 外接显示器拒绝了亮度调节 | 请在显示器自身设置中开启“DDC/CI”。若使用转换器,请直接连接 |
| A-7 | Linux 上未安装外接显示器用的软件 | 在终端执行 sudo apt install ddcutil |
| A-8 | Mac 上缺少随程序附带的工具 | 请重新安装电脑端应用 |
| A-9 | Linux 上没有操作外接显示器的权限 | 执行 sudo usermod -aG i2c $USER 后重新登录 |
B 无法操作视频
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| B-1 | 找不到下一集 | 请重新打开播放页面后再试 |
| B-2 | 找不到上一集 | 同上 |
| B-3 | 无法读取当前集数 | 请打开正在播放的页面,而不是作品介绍页 |
| B-4 | 跳转过程中该标签页被切换到了其他页面 | 直接再按一次即可 |
| B-5 | 已是第 1 集,没有上一集 | 无需处理 |
| B-6 | 已是最后一集,没有下一集 | 无需处理 |
| B-7 | 页面已跳转,但没有自动开始播放 | 请在电脑上点击播放,或使用 DeckMote 的播放按钮 |
| B-8 | 已达到同时观看数量上限 | 请停止其他设备上的播放 |
| B-9 | 已达到同时观看数量上限(快进 / 快退时) | 请停止其他设备上的播放 |
| B-10 | 未能跳转到下一集 | 请再按一次。若仍不行,请重新打开播放页面 |
| B-11 | 未能跳转到上一集 | 同上 |
C 无法切换音频输出设备
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| C-1 | 上一次切换尚未完成 | 请等待几秒后再按 |
| C-2 | 所选设备不支持切换 | 请选择其他设备 |
| C-3 | 切换执行失败 | 请再按一次。若仍不行,请在电脑的声音设置中切换 |
| C-4 | 列表中的设备在按下时已经消失 | 请重新打开列表 |
| C-5 | 找不到可切换的设备 | 请确认电脑已连接扬声器或耳机 |
| C-6 | Mac 上找不到切换输出设备的工具 | 请重新安装电脑端应用 |
| C-7 | Linux 上未安装切换输出设备的工具(pactl) | 请在终端执行 sudo apt install pulseaudio-utils |
D 无法操作电源
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| D-1 | 第二部手机尝试操作电源 | 电源操作仅限最先连接的手机 |
| D-2 | 睡眠 / 重启 / 关机执行失败 | 请在电脑上直接操作 |
E 无法发送文字
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| E-1 | 待发送到电脑的文字堆积过多 | 请稍候片刻,再重新输入剩余部分 |
| E-2 | 发送到剪贴板的文字超过上限(60 万字节) | 请减少文字量。超出部分已被截断 |
F 无法操作浏览器
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| F-1 | Mac 上没有操作浏览器的权限 | 系统设置 > 隐私与安全性 > 自动化,开启 DeckMote 下的 Safari / Chrome |
| F-2 | Safari 的某项设置已关闭 | 请在 Safari 的“开发”菜单中打开开发者设置,开启“允许Apple事件中的JavaScript” |
| F-3 | 浏览器操作繁忙 | 请稍候片刻再按 |
| F-4 | 未安装浏览器扩展 | 请在电脑端应用的菜单中执行“安装浏览器扩展” |
G 无法调节音量
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| G-1 | 音量调节失败 | 请再按一次。若仍不行,请重启电脑端应用 |
H 操作未能完成
| 编号 | 发生了什么 | 该怎么做 |
|---|---|---|
| H-1 | 电脑与手机的时间相差超过 1 小时 | 请校正其中一方(建议使用自动设置)。时间不一致期间,为防止冒充,指令不会被执行 |
| H-2 | 启动应用中登记的名称为空 | 请在启动应用的设置中重新登记 |
| H-3 | 不支持的链接格式 | 仅能打开以 http、https、mailto 开头的链接 |
| H-4 | 不支持该操作 | 请将手机端与电脑端应用都更新到最新版 |
| H-5 | 操作未生效 | 请再按一次。若仍不行,请重启手机与电脑两端的程序 |
| H-6 | 电脑收到了无法识别的指令(括号内为指令名) | 请更新电脑端应用 |
| H-8 | 电脑端无法运行外部程序(括号内为原因) | 请查看括号内的原因。如不清楚请与我们联系 |
| H-9 | 设置未能保存到电脑 | 请确认电脑的剩余空间与写入权限。关闭程序前设置仍然有效,下次启动会恢复原状 |
| H-10 | Mac 上没有按键操作的权限(显示桌面) | 系统设置 > 隐私与安全性 > 辅助功能,开启 DeckMote |
| H-11 | Linux 的 Wayland 环境下按键无法送达 | 请启用 XWayland 后重新登录 |
| H-12 | 未能打开链接 | 请确认链接地址是否正确,并确认电脑上能否打开浏览器 |
没有编号的提示(“已取消”“正在跳转到下一集…”等)是进行中或完成的通知,并非失败。